Cables for Bang & Olufsen Beoplay (RJ45)

You can connect this cable directly from Beoplay or Playmaker to existing Beolab speakers.
The cable is intended for new B&O Audio/TV/Lab and older Audio/TV/Lab products;
it works on both older and newer products, the cable is bidirectional.

1 side RJ45 (B&O connector)
1 side DIN8 (B&O connector)
Suitable for IHC Net Beolink installation.
RJ45 To DIN Male.
Cable is 8 x wired, thickness approx. 4 mm.

1 side RJ45 1 side din8 male

You can connect this cable directly from Beoplay or Playmaker to existing Beolab speakers.
The cable is intended for new B&O Audio/TV/Lab and older Audio/TV/Lab.
It works on older and newer products; the cable operates in two directions, from RJ45 to PL or from PL to RJ45.
1 side RJ45 (B&O connector)
1 side DIN8 (B&O connector)
Suitable for IHC Net Beolink installation.
RJ45 To Male.
This cable is 8x wired and is being discontinued.

Still in stock:
1 - 7 pieces
1.8 - 6 pieces
7 - 2 pieces

Network Adapter CAT6 shielded metal.
Connector: 2 x RJ45.
Suitable for 10/100/1000 Mbps.

This Y-cable has an RJ45 connector for Beoplay or Playmaker/Core/Connect Core.
Connect this to the RJ45 Powerlink and create 2 DIN8 connections for Beolab speakers.

Original B&O RJ45 splitter.
1 input, 2 outputs.
Recommended cabling: Cat7.
Beosound core and connect core share only 1 PowerLink connection.
With this splitter, you can connect 2 Beolab speakers separately.
Connect a short Cat7 cable between the core/connect core and the splitter,
connect both Beolab speakers to the splitter.
Dimensions: L=5.2 cm W=3.2 cm H=2.5 cm
Connection: RJ45

Cable adapter from RJ45 to PowerLink female.
You can connect existing DIN8 (PowerLink) connections to this.
RJ45 To Female PowerLink (DIN8)
This cable connects older Beolab DIN8 (PowerLink) cables to newer RJ45 connections.
For Beovision and Beosound with RJ45.
Length approx. 15 cm.

Cable adapter from RJ45 to Powerlink female in white.
You can connect existing DIN8 (Powerlink) to this.
RJ45 To Female Powerlink (DIN8).
This cable connects older Beolab DIN8 (Powerlink) cables to newer RJ45 connections.
For Beovision and Beosound with RJ45
Length approx. 15 cm.

6-Port distributor for MasterLink and PowerLink (RJ45).
L x W x H, 14 cm x 2.2 cm x 2.5 cm
1-in 5-out, no power required
This 6-way connection hub is perfect for smaller to medium-sized B&O installations, such as a living room or home cinema setup with multiple BeoLab speakers.
Key features.
Suitable for Bang & Olufsen BeoLab speakers or MasterLink connections.
6 RJ45 PowerLink connections or 6 MasterLink connections.
For connecting multiple active B&O speakers.
No signal loss or audible noise.
Plug & play – no power supply required.
Compact and organized cable management.
Ideal for multi-speaker B&O setups.

Application.
Connecting multiple BeoLab speakers to a single B&O source.
Expanding existing Bang & Olufsen installations. Neatly and centrally distributing Powerlink signals.

10-Port distributor with RJ45 connection, connects 9 Beolab speakers via RJ45.
LXWXH 22 cm x 2.2 cm x 2.5 cm
1 in, 9 out, no power required.

Thanks to high-quality shielding and proper Powerlink signal distribution, this connection hub is ideally suited for high-end Bang & Olufsen systems, such as multiroom setups, home cinemas, or commercial applications. The RJ45 connection hub prevents signal loss, hum, and interference, even with longer cable lengths.
The 10-way RJ45 connection hub is fully compatible with modern B&O Powerlink via RJ45 and provides a neat, future-proof solution for extensive BeoLab configurations. Key features
Specifically for Bang & Olufsen BeoLab speakers
10 RJ45 Powerlink outputs or 10 MasterLink connections
Suitable for large B&O speaker setups
Stable, noise-free signal distribution
Passive system – no power supply required
Professional build quality
Ideal for home cinema, multiroom, and business applications

Application

Central connection of multiple BeoLab speakers
Large Bang & Olufsen audio installations
Clear cable management for complex setups

Connect a non-B&O subwoofer or receiver to your B&O system.
This cable handles the audio output from PowerLink to RCA plugs.
Please note the following:
A B&O music system has volume control.
If you connect a music system to a receiver, the volume of the B&O system will need to be turned up.
By default, the system is set around 16 (16% open); this will need to be increased to 40 to 50.
Once you have 'tuned' the sound, you can fix it on the B&O system.
To fix the volume, consult the manual.

Flexible CAT7 Powerlink cable.

This high-quality Powerlink cable is specifically designed for use with Bang&Olufsen's RJ45 Powerlink connectors.
The cable meets the technical connection and quality specifications that B&O applies to these connections and ensures reliable and stable signal transmission.
This makes this cable an excellent choice for connecting compatible Bang&Olufsen equipment.

Very high transmission speed.
8-wire network cable
Halogen-free
Double shielded S/FTP
Metal foil (PiMF) pairs
Cable diameter approx. 6.2 mm
10/100/1000/10000 Base-T Ethernet
Flame retardant
2 x RJ45 connectors
Gold-plated, sealed with strain relief.

Can be used to connect a mobile phone to Beoplay to play MP3s via Beoplay / Playmaker.
Or from PowerLink to the mini-jack connection on the receiver.
Available in black and white.
White is being discontinued; still available:
2 meters - 1 piece
3 meters - 4 pieces
5 meters - 4 pieces
10 meters - 3 pieces

RJ45 Screw Connector
Handy RJ45 Connector for use with network cables.
The screw connector features:
4 x (+) screw connectors
4 x (-) screw connectors