Powerlink Cable

This power link cable is extremely flexible and internally performed 8 x connected with wiring (full-wired)

Cable thickness 3.5 mm.

Intended for all BeoLab loudspeakers.

Plug and play cable. (Photo = cable)

For: Beolab Penta/1/2/3/4/5/7/9/10/11/2500/3000/4500/5000/6000/8000/8002/4002.

Suitable for, Beomaster 6500/7000-Beosound 4/5/9000/2500/3000/3200/Ouversture, Beocenter 2/2300, Beosystem 4500.

This cable is used to still be able to connect to a second speaker . BeoLab speaker with a 1 input , ( eg beolab3 )
 

The white / silver Din plug behind the beolab3 speaker , two others in the Powerlink cables. ready.

Also possible with Powerlink splitter 1 to 5 for connection 5 beolabs to one connection, scroll down for these connector

Cable is 3,5 mm thick and not shielded.

Powerlink Y cable shielded, scroll down.

This adapter is meant to extend to you a power link cable. 

Cable is 3,5 mm thick and not shielded.

for shielded, look here shielded powerlink

This power link cable is extremely flexible and internally performed 8 x connected with wiring (full-wired)

Cable thickness 3.5 mm, color white can be different MKII cable.

Intended for all BeoLab loudspeakers.

Plug and play cable. (Photo = cable)

OFFER, WHITE IS FROM OUR ASSORTMENT

Quantity still in stock,

you cannot order more than the specified quantities!

0.30 cm - 11 pieces

30 meter - 7 pieces

For:

This cable is used to still be able to connect to a second speaker . BeoLab speaker with a 1 input , ( eg beolab3 )
 
The white / silver Din plug behind the beolab3 speaker , two others in the Powerlink cables

cable is 3,5 mm thick and not shielded.

This power link cable is extremely flexible and internally 8 x connected with wiring done and is double shielded (full-wired)

Cable thickness 5 mm MKII cable.

Intended for all BeoLab loudspeakers.

Take the following into account, cables are never the specified lengths, there is always a difference of 10 to 25 cm, which is shorter, for example 9 meters is 8.75 m

For: Beolab Penta/1/2/3/4/5/7/9/10/11/2500/3000/4500/5000/6000/8000/8002/4002.

Suitable for, Beomaster 6500/7000-Beosound 4/5/9000/2500/3000/3200/Ouversture, Beocenter 2/2300, Beosystem 4500.

Factory = factory cable MKII Shielded

Hand = handmade cable MKII Shielded

Handmade powerlink Y cable specially intended for 5 mm shielded cables.
This Y-cable was specially made for me.

Performance,
1 X 8 x Wired Shielded DIN8 Male
2 X 8 x wired shielded DIN8 female
Cable length 50 cm.
Manufactured from Bosscom shielded cable 5mm.
For use in,

BeolabPenta/1/2/3/4/5/7/9/10/11/2500/3000,
4500/5000/6000/8000/8002/4002.

Specially manufactured at our request for the shielded cables.

This cable connects 2 PowerLink cables together, it is intended for the 5 mm Powerlink shielded cable.
2 sides din8 female.
8 x wired and shielded manufactured from bosscom shielded series.
cable length 20 cm, shielded 5 mm

This power link cable is extremely flexible and internally 8 x connected with wiring done and is double shielded (full-wired)

Cable thickness 5 a 5,5mm, white can be different.

Note, the color white is not always pure white, cream is also possible, the din8 plugs may also be different.

Intended for all BeoLab loudspeakers.

Plug and play cable. (Photo = cable)

For:

Received 6 x Powerlink DIN8.

Plug your powerlink cable into 1 of the 6 outputs and connect 5 other powerlink cables to the BeoLab speakers.

this is not a dolby module, so connected speakers will continue to play in stereo.

MKII connected 8 X wired, not shielded.

No power or adapter required.

Connect another brand of subwoofer or another brand of speakers (active) to the existing Powerlink connections of the B&O system (center/master/sound/ouverture)

Din7 to 2 x rca (powerlink to 2 x tulip)

Cable is also suitable for connecting from the power link of a BeoMaster/Centre/Sound/Overture to another brand of amplifier.

Please note, if no speakers are connected to a BeoMaster/Sound/Center/Overture, the speaker sense is also required.

DIN5 (AUX) to 2 x RCA connector

Cable length 1,20 meter

Note, this is NOT a Y-cable for speakers!

This is an AUX adapter for an extra B to connect & D or other brand to the AUX output so you can so with one Aux input 2 external device drivers on your BeoCenter or master etc., (DIN7) of course they do not work both the Input.

The cable is similar to the PL-Y, but there is not suitable for this. (Photo = cable)

Look at you if you please from when ordering!

4 core cable, high-quality color and black.

Become a meter sold due to small stock.

(thin rope) (2.6 mm)

Can not be taken back. Cables purchased by the meter.

8-wire power link cable (3.5mm)
HQ quality cable. (Cable can meters marking)
This cable consists of the following colors,
Gray
Earth (1)
Brown
Yellow
Green
White
Earth (2)
Pink
ORIGINAL COLORS B&O.
Cables per meter purchased cannot be returned.

8 wire cable (3,5mm) high quality cable.

This shielded cable consists of the following colors,
Grey
Earth (1)
brown
yellow
green
white
Earth (2)
pink
B&O original colors.  

Last piece, will no longer be in stock!

8 core cable (5.5mm) high quality cable, shielded with meter indication.

This shielded cable consists of the following colors,
gray
Earth (1)
black
yellow
green
white
Earth (2)
pink
Original colors B & O

 

Cables bought per meter can not be taken back.

 

8 core cable (5.5mm) high quality cable, shielded with meter indication.

This shielded cable consists of the following colors,
gray
Earth (1)
brown
yellow
green
white
Earth (2)
pink
Original colors B&O

Last pieces of shielded powerlink cable.

Link Power plug can be used to solder itself.
the plug has 8 connectors.

Lumberg DIN8 Plug. (for Powerlink cables)

Nice metal plug.

Powerlink Installation.

One connection DIN8,

solder version.

This cable can be directly connected to BeoLab BeoPlay.

B&O newest serie have RJ45 as connection, the old DIN8 (powerlink) has change.

With these cable can you old connect to new, or new to old, cable works two direction.  

 Cable is 8Ad, Full wired.

These cable is for connection from Beoplay or playmaker to connection directly to Beolab.

Also for IHC Net Beolink Installatie.

RJ45 To Male.

Full-wired.

Expires from assortment, gone = gone

Still in stock:

50 cm - 2 pieces

1 - 8 pieces

1.8 - 8 pieces

7 - 3 pieces

With this cable you can directly from BeoPlay to 2 x powerlink female,

For connecting to BeoLab speakers.

The cable is intended to connect to a Power Link cable entry.

BeoPlay or from the playmaker.

Disappearing from rnage,

Still in stock, gone = gone

15 cm - 11 pieces

30 cm - 11 pieces

1 meter - 4 pieces

Socket DIN8 female,

PIN 8

Pin layout 270°

straight soldering

Chassis RCA (Tulp) Female Red

Type, metal - goldplated

Connection,

Front : Tulp (RCA) - Female

Back : Solder

Chassis RCA (Tulp) Female BlackType, metaal - Verguld

Connection,

Front : Tulp - Female

Back : Solder