Beosound core

Connection cables suitable for the Beosound Core

Otherwise also see page, Beoplay for more RJ45 connections.


Connections Beosound Core,
All the way to the right. RJ45 power link connection
1 to the left. DPL for I.R.eye connections
Ethernet. internet connection
Optical out. for connection Sound shape
Line-in/Optical. minijack input for digital or analog (The Core can be connected to a TV via the LINE-in/Optical input using an SPDIF cable. A minijack/SPDIF adapter is required (see item 6). Item 7 can be used as the SPDIF cable.)

Beosound Core to Beolink Passive or Beolab Penta

AV-Solution
Add to cart
  • Description

Connect the BeoSound Core to the BeoLink Passive,

this is a special adapted cable, the Dinplug is soldered differently than the standard cable.
A standard RJ45 to Din8 has the disadvantage that it does NOT disable the passive or allow the info screen to work

* beosound moment, essence, Core & connect core & beovisions no longer provide information to beolab with information windows after entering RJ45 connections.

If the BeoLab Pentas/3000/4500/5000 are looped through to each other, only 1 of this cable is needed.


Questions, mail us.

RJ45 to DIN8 Special cable for Beolab 5

Van Damme
Add to cart
  • Description

Special connection cable, different from the rj45 to din cables you find at beoplay cables.


Please note, this cable is different from the above core beolink passive cable! other picture follows!


This Van damme cable is MKII connected (8X) outer jacket is polylefin (PE-LD)

cable is shielded aluminum/polyester foil,

cable thickness is approx 6 mm

Connecting cables are 0.16 mm and oxygen free copper.

This should solve the noise that normal cables from Cavus or Bosscom can cause when connected to the beosound Core or Essence.



Please note, When connecting cables always disconnect the power from the TV or audio as well as the beolab, wait 30 seconds before disconnecting or connecting the cable.



BeoPlay RJ45 to Powerlink

Bosscom
Add to cart
  • Description
  • Specifications

This cable can be directly connected to BeoLab BeoPlay.

B&O newest serie have RJ45 as connection, the old DIN8 (powerlink) has change.

With these cable can you old connect to new, or new to old, cable works two direction.  


 

 Cable is 8Ad, Full wired.

 

Color: Black
Application: Transporting the newest connection (RJ45) to DIN8 (old B&O connection) on Beolab loudspeakers
Plugs.: RJ45 -> DIN8 (RJ45 male – DIN8 male)
Cable Thickness: ± 4.0 mm
Shielding:

No
Number of conductors: 8-conductor (fully wired)
Structure: Balanced audio signal (left/right) + data lines
Sheath: Flexible PVC / PE (depending on brand)
Purpose: Connecting old to new
Mark: Factory Cables: Bosscom.
Suitable for: Penta/1/2/3/4/5/7/9/10/11/2500/3000/4000/4500/5000/6000/8000/8002/4002
Adjust: Beomaster 6500/7000, Beosound 4/5/9000/2500/3000/3200/
Ouversture, Beocenter 2/2300, Beosystem 4500, Beovision from '80 up to 2012 (than RJ45)BeoPlay, Playmaker, BeoSound Essence (MK1/MK2), BeoSound Core BeoSound Moment Connection Hub, beovision models from 2012
Important: Cable works in 2 directions, can also be used from Beomaster to Beolab 12

Beoplay RJ45 to Powerlink White

Bosscom
Add to cart
  • Description
  • Specifications

These cable is for connection from Beoplay or playmaker to connection directly to Beolab.

 

Also for IHC Net Beolink Installatie.

RJ45 To Male.

Full-wired.


Expires from assortment, gone = gone

Still in stock:


1 - 8 pieces

1.8 - 8 pieces

7 - 3 pieces

 
Color:

White
Application: Transporting the newest connection (RJ45) to DIN8 (old B&O connection) on Beolab loudspeakers. Or old to newest.
Plugs.: RJ45 -> DIN8 (RJ45 male – DIN8 male)
Cable Thickness: ± 4.0 mm
Shielding:

No
Number of conductors: 8-conductor (fully wired)
Structure: Balanced audio signal (left/right) + data lines
Sheath: Flexible PVC / PE (depending on brand)
Purpose: Connecting old to new
Mark: Factory Cables: Bosscom.
Suitable for: Penta/1/2/3/4/5/7/9/10/11/2500/3000/4000/4500/5000/6000/8000/8002/4002
Adjust: Beomaster 6500/7000, Beosound 4/5/9000/2500/3000/3200/
Ouversture, Beocenter 2/2300, Beosystem 4500, Beovision from '80 up to 2012 (than RJ45)BeoPlay, Playmaker, BeoSound Essence (MK1/MK2), BeoSound Core BeoSound Moment Connection Hub, beovision models from 2012
Important: Cable works in 2 directions, can also be used from Beomaster to Beolab 12

Bang & Olufsen RJ45 Splitter

917931783285
Add to cart
  • Description

Original from B&O, rj45 splitter.

1 input to 2 outputs/jacks
recommended cabling, cat7.

For example, connect the BeoLab 19 and BeoLab 18 separately.

Size: L=52 mm B=32 mm H=25 mm

Size: L=2.047 inch B=1.259 inch H=0.984 inch

Toslink Mini Adapter

Add to cart
  • Description

Toslink to 3.5mm Minijack adapter. Easily connect existing Toslink cables to devices with a Minijack input.

Toslink Cable 1 meter

HIGH-END
Add to cart
  • Description

Both sides Toslink - Toslink connection.

High-End Cable with Gold Plug

Beoplay RJ45 to 2 x Female Black

Bosscom
Add to cart
  • Description

With this cable you can directly from BeoPlay to 2 x powerlink female,

For connecting to BeoLab speakers.

RJ45 to 8 pin DIN Female Black

Bosscom
Add to cart
  • Description
This cable is for connect BeoPlay to Powerlink (female)

CAT7 Black

Ligawo of S-Conn
Add to cart
  • Description
Flex CAT7 cable to speed 10 gigabit.
Very high transmission speed.
8 thread netwerk kabel
Halogeen vrij
Double shieldedS/FTP
Paren in metal folie (PiMF)
Kabel diameter ca 6,2 mm
10/100/1000/10000 Base- T Ethernet
Vlam vertragend
2 X RJ45 Connectoren
Gold Plated verzegeld met strain relief.

RJ45 Powerlink Cable Black

Mark: Bosscom
Add to cart
  • Description
Latest cables for BANG & OLUFSEN.
cable is 2.5 mm thick, high quality and extremely flexible,
The RJ45 connectors are wired x 4.
This is NOT a cat6 cable, specifically designed for the latest BeoPlay speakers, so not suitable for beonet/internet!