Distributors for Masterlink & RJ45 – Beolab & B&O connections

Master Link box connection box cor 1x ML with plug and 1x ML cable.

The box can be used when you would like to extend a ML cable with plugs un to a reel of ML cable.

Master Link connection perused.

If the cable is too short, it can be used as a connector with a new cable.

Housing color black.

Used ML-Distributor.

May be damaged and appear different than this picture.

Connect multiple Masterlink components to the systeem.

Little in stock.

Original product of B&O for the repair of a cable break, inc manual and LSA PIN.

6 Ports distributor for masterlink and powerlink

L X B X H, 14 cm x 2,2 cm x 2,5 cm

One input, 5 output (from Core to 5 beolab)

The RJ45 distribution block is specifically designed for Bang & Olufsen Powerlink systems and is fully compatible with modern B&O products that use RJ45 Powerlink connections, such as BeoSound and BeoVision systems. Thanks to its high-quality internal wiring, audio signals remain stable and clear, even when multiple loudspeakers are connected.

This 6-port connection block is perfect for small to medium-sized B&O installations, such as living rooms or home cinema setups with multiple BeoLab speakers.

Key Features
Designed for Bang & Olufsen BeoLab loudspeakers
6 RJ45 Powerlink outputs or 6 masterlink outputs
Connect multiple active B&O speakers to one source
No signal loss or audible noise
Plug & play – no external power required
Clean and organized cable management
Ideal for multi-speaker B&O setups

Applications
Connecting multiple BeoLab loudspeakers to one B&O system
Expanding existing Bang & Olufsen installations
Central Powerlink signal distribution

*Design of Hall-Audio and Polyvection.

10 ports distributor with RJ45 connection.

L X B X H, 22 cm x 2,2 cm x 2,5 cm

Connect 9 Beolab to these port and one to core/moment/connect-core/essence.

Thanks to high-quality shielding and correct Powerlink signal routing, this connection block is ideally suited for high-end Bang & Olufsen systems, including multiroom installations, home cinema setups, and commercial applications.

The RJ45 connection block prevents signal loss, hum, and interference, even over longer cable runs.

The 10-port RJ45 connection block is fully compatible with modern B&O Powerlink via RJ45 and provides a neat, future-proof solution for complex BeoLab speaker configurations.

Key Features

Specifically designed for Bang & Olufsen BeoLab loudspeakers
10 RJ45 Powerlink outputs
Suitable for large B&O speaker installations
Stable signal distribution without noise or interference
Passive design – no power supply required
Professional-grade build quality
Ideal for home cinema, multiroom, and commercial use

Applications
Central connection of multiple BeoLab loudspeakers
Large Bang & Olufsen audio installations
Clean and structured cable management

*Design of Hall-Audio and Polyvection.

RJ45 to Masterlink adapter – The only company with this Masterlink connector. Easily connect via CAT7.
Easily connect B&O Beosound and BeoVision with a CAT7 cable. Plug and play, gold-plated contacts, and durable 3D-printed housing. The ideal solution for easily running CAT7 cable through a conduit for use with classic Masterlink systems. Easily connect your Beolab3500 or Beolab2000 to your Beosound/Center/Vision or Ouverture via this Masterlink adapter.

With the beolink 1611 is it possible to make multi masterlink connection system.

*Design of Hall-Audio and Polyvection.

Our Masterlink to RJ45 adapter is the solution for replacing defective or short Bang & Olufsen Masterlink cables.
Simply plug multiple Cat7 network cables into the RJ45 connector and use the adapter to connect your B&O Masterlink devices such as BeoSound, Beocenter, or BeoVision.

3D-printed and tested
Works the same as original B&O connectors
Plug-and-play installation with screw terminals
Suitable for all B&O Masterlink connections

A sustainable, affordable, and modern solution for anyone who plans to maintain or expand their B&O Masterlink system.
Low stock.