Hall-Audio Bluetooth Streaming

HALL-Audio
HALL Connector gives your stereo or active speakers a wireless connection so you can control the music with your phone, tablet or computer.

Connect the product to your device with the included cable, plug in the power supply and connect via Bluetooth and you're ready to stream your music from your phone, tablet, or PC. The HALL connector is compatible with all music services.

The product is just as user-friendly as our wireless amplifiers because you don not need any apps to use the products. Volume and music are controlled directly from the device you have connected via Bluetooth, it is extremely simple and easy. All of our products are also equipped with aptX technology that ensures you better sound quality.

Specifications
Weight 0.300 kg
Size 4.1 × 4.1 × 2 cm

RECEIVER TYPE 
Stereo Receiver

POWER SUPPLY USB
5V 1.5A mains plug included

CONNECTION 
Jack connector 3.5 and Bluetooth 4.2

PROTOCOL 
A2DP, aptX

WEIGHT 
80 Grams

RANGE 
10-15 Mtr

Please note, delivery is without a connection cable to your source, select below which cable you need, questions? mail us.

bluetooth receiver without packaging or manual. with 12 V charger, see photo.

TSA8636 is a compact and easy-to-use Bluetooth audio receiver.

When this Bluetooth music receiver is connected to the Line-In or Auxiliary input of your home audio system.

You can then stream audio from your Bluetooth-enabled mobile phone or MP3 player to your home audio system.

Enjoy the convenience of having your music source in the palm of your hand and listening to it through your stereo.
Functions:

Size: 41*41*20mm
Bluetooth 5.0
Apt-X supported
Stereo reception
Effective transmission distance: 15-20m
Mcro USB female port for powering the receiver from any USB power source (5VDC)
Compatible with all Bluetooth devices that support media audio, including iPhone

This WiFi Streamer can directly stream wireless to connected BeoLabs.

For the older ones with a DIN8 connection, an RJ45 to DIN8 female is included for connecting 2 BeoLab speakers, in addition,
this WIFI-Streamer for connecting to TVs via an HDMI-ARC or can be connected via the optical out of the TV. operate with the supplied remote control or via app)

The RJ45 connection can also be used as an input, if necessary a BeoCenter/sound can be connected.

So if you want to connect 1 Overture and 2 BeoLabs, an extra Y cable is needed (din8), or you connect the BeoLab together, ask us if you can't figure out the possibilities.

NOTE, When connecting via the HDMI-ARC, the TV sound setting should be set to PCM.

This WiFi Streamer has a built-in trigger signal of 4.5V to switch the speakers on and off.

supports Airplay 2, you can stream Spotify via iPad and can be connected to other Airplay 2 devices, including Sonos, B&O, Heos etc.

Specifications:
•Airplay2

•WiFi 2.4GHz and 5GHz

•Bluetooth 5

•HDMI ARC

•5V trigger signal

•RJ45 audio in/out

•Optical

•App Muzo Pod

•Dimension. 10 x 10 x 3.5 cm

This is the perfect solution for connecting your B&O speakers to TVs that only have an HDMI arc or optical connection, and you can also stream via Bluetooth.

with 2 wifi streamers you can also use multi-room.

INCLUDING:

1 X RJ45 - 2 x DIN8 Female Cable

1 X Remote Control (without batteries)

1 X USB Charging Cable

1 X 230V Power Supply

1 X HDMI Cable 50 cm

color is black

Manual

controllable via the App or with the supplied remote control, t

he TV volume responds to the remote control of the TV itself.

In the App you will find TuneIn to stream internet radio.

Spotify or Qubuz can be activated via login codes (payment versions)

On the App is, (App=WiiM Pod)

TuneIn, Iheartradio, Spotify, QQmusic, Tidal, Napster, Qubuz, Amazon Music.

more info: just email us, or go to ower website for more details.

If you have older CX50 or CX100 or the BeoVox series, you can use them with this receiver.

plug in the speakers and connect via bluetooth to your phone/ipad/pc/laptop, then stream your favorite music with spotify.

This receiver has a connection for 1 set of speakers (L/R) and 1 minijack connection as LINE-IN.

Amplifier has a power of 2 x 8 watts.

Connection via twist or banana plug (not included)

Specifications,
Size 31.5 × 23.5 × 11 cm
Amplifier Type,
Digital Class D Effect 
8W per channel in 8 Ohm
12W per channel in 4 Ohm

Impedance, 
8-8 Ohm

Output, 
4 banana connectors, Screw terminals

Connection, 
Jack connector 3.5 and Bluetooth 4.2

Power supply 
12V 3A included

Protocol, A2DP, aptX

Weight, 0,870 kg

Range, 10-15 Mtr

If you have older CX50 or CX100 or the BeoVox series, you can use them with this receiver.

plug in the speakers and connect via bluetooth to your phone/ipad/pc/laptop, then stream your favorite music with spotify.

This receiver has a connection for 1 set of speakers (L/R) and 1 minijack connection as LINE-IN.

Amplifier has a power of 2 x 8 watts.

Connection via twist or banana plug (not included)

Specifications

Size 31.5 × 23.5 × 11 cm
Amplifier Type 
Digital Class D

Effect 
30W per channel in 8 Ohm

Impedance 
8-8 Ohm

Output 
4 banana connectors, Screw terminals

Connection 
Jack connector 3.5, Subwoofer output and Bluetooth 4.2

Power supply 
24V 2A included

Protocol 
A2DP, aptX

Weight 
0,870 kg

Range 
10-15 Mtr

Din5 to minijack,

For connection to GSM, tablet, pc or tv.

Din5 from beosound/center in AUX port.

Connect BeoLab speaker via headphone output/ipad/ipod/tablet/gsm tv or bluetooth.

Intended for: BeoLab 3/9/4002/6002/8002

This cable is not suitable for the:
BeoLab 1/2/4/5/7/10/11/2500/3000/4000/4500/5000/6000/8000/penta

Connected to headphone output pc/gsm/tabet/tv or the Hall-Bluetooth

Cable for headphone output to amplifier or bluetooth to amplifier.
 
Can also connect Apple Airport to div. BANG & OLUFSEN components, or Audio-In tuner / TV

Or connection to Beosound4 to GSM / airport / TV

Cables are gold plated.
 
For,
BeoLab 1/4/3000/4000
beolab 4500/5000/6000
beolab 8000 and penta

Via (tulip) on LINE

Also for connection to the hall-bluetooth

This cable is not delivery anymore from us.

Short instructions for connecting via a Beolink Converter 1611, a better connection.

Finally, a direct connection to your Beolab 3500 or LCS9000 speaker without Masterlink!

Use this cable to connect your B&O Beolab 3500 or LCS9000 speaker to an iPod, non-B&O TV or Airport Express and stream your music with Airplay from your iPhone or Apple device.

This high quality cable will allow you to connect a Bang and Olufsen Beolab 3500 or LCS9000 link room speaker directly to your Airport Express, iPod, non-B&O TV or any device with a headphone socket. This will let you stream iTunes music and other audio from your iPhone, iPad or Mac wirelessly to your Bang and Olufsen Beolab 3500 or LCS9000 speaker via the Powerlink or MCL socket.

Compatibility: This cable will fit both versions of Beolab 3500. Beolab 3500 mk.1 and LCS9000 speakers have serial numbers lower than 19343452, so please order the mk.1 cable option for these speakers.  If the serial number of your speaker is 19343452 or above, you have the mk.2 speaker, so please order the mk.2 cable option.  Please check compatibility before you buy - if you are in any doubt, please ask!

A B&O remote (either Beo4 or Beolink 1000) is needed to set the speaker to MCL mode (Beolab 3500 mk.1/LCS9000) or Powerlink mode (Beolab 3500 mk.2) each time it is switched on. For Beolab 3500 mk/1 or LCS9000, please press MENU 0 4 GO on a Beo4 or MENU 0 4 PLAY on a Beolink 1000, or for Beolab 3500 mk.2 please press MENU MENU 0 4 GO on a Beo4 or MENU MENU 0 4 PLAY on a Beolink 1000 (please ensure that the "GO" or "PLAY" button is only pressed briefly).  Volume control is then managed from the connected device (eg. TV, iPod, etc).  To turn off the speaker, press the “Power Off” button on the remote as usual.
We chose 5 pin DIN cables for the Beolab 3500 mk.2 cables as they fit and work perfectly in the 7 pin DIN Aux sockets on most B&O systems. Little known fact: the extra two pins are only used for sending remote control data to other B&O products - hence they are spare in this application.  Our Beolab 3500 mk/1 and LCS9000 cables do need the extra two pins, so these have 7 pin plugs fitted!

Use this cable to connect your B&O Beolab 2000 speaker to an iPod, non-B&O TV or Airport Express and stream your music with Airplay from your iPhone or Apple device.

Also for connected to the Hall bluetooth streamer

Before first use (and after power cuts) please press MENU 0 9 GO ^ (up arrow) CD CD

on a Beo4 or MENU 0 9 PLAY ^ (up arrow) CD CD on a Beolink 1000. 

Volume control is then managed from the B&O remote or from the volume wheel on the Beolab 2000. 

To turn off the speaker, press the “Power Off” button on the remote as usual.

Latest cables, is no longer made.

SOLD OUT!